6 X 18 LANDIS MODEL 2R ANGLE HEAD GRINDER

                          30 DEGREES

                  S/N 859‑10     YEAR:  1973

STANDARD CATALOG SPECIFICATIONS

Nominal work swings..................................... 6"

Maximum work swing over table........................... 6 31/32"

Nominal distances between centers....................... 18"

Maximum work swing & diameter standard machine will grind w/full size standard wheel on straight wheel head machine w/hydraulic infeed stroke as noted................................ 6"‑ 2" H.I.

Minimum diameter wheel to grind zero dia.

work on centers on straight wheelhead machine........... 15"

Maximum work swing and diameter standard machine will grind with full size standard wheel on angle wheel head machine with hydraulic in feed stroke as noted.

Maximum diameter wheel to grind zero diameter work

on centers on angle wheelhead machines.................. 15"

Hydraulic tank capacity, gallons........................ 19"

WORK CARRIAGE

Traverse speed ‑ Inches per minute

All lengths thru 72\" ................................... 2 to 240

Traverse speed per turn of hand wheel

Slow.................................................... 0.100"

Fast.................................................... 1.000"

Work rest capacity............................ 1/4" to 2 1/2"‑6"

                                               1/4" to 4" ‑ 10"

WHEELHEAD & WHEELFEED

Grinding wheel size ‑ standard.......................... 24"x10"ID

Grinding wheel spindle speeds, RPM...................... 1000/1271

Grinding wheel minimum dia. of worn wheel............... 15"

Hydraulic rapid infeed: Standard maximum................ 2"

                        Standard minimum................ 1/2"

Hydraulic rapid infeed ‑ Angle

Wheelhead machine:  Maximum ............................ 2"

                    Minimum ............................ 1/2"

ELECTRIC MOTORS

Wheel drive motor ‑ H.P. .................... 10  HP ‑ 1775 RPM

Work drive motor ‑ H.P. ..................... 1/2 HP ‑  900 RPM

Wheel spindle lubrication motor H.P. ........ 2

ELECTRIC MOTORS

Hand table rack and gear

Dead center work head

Hyd. tail stock

Plunge

Behind the wheel dresser (Tru-Form)

Taper adjustment on table

ADDITIONAL FEATURES

Allen Bradley A.C. Servo 1391 control table feed

Model 5430 PAC Sci. stepping motor on in feed hyd. plunge

Specifications are deemed accurate, however, subject to verification or prior sale.