10" x 20 LANDIS 1R 30 ANGLEHEAD CYLINDRICAL GRINDER

S/N T879-08       Year:  1981

STANDARD SPECIFICATIONS

Nominal work swing. 10

Nominal distance between work centers*. 20

Floor space required. 105 x 65

Coolant tank capacity.. 19 gallons

Hydraulic tank capacity.. 9 1/4 gallons

Height from floor to work centerline.. 41 3/4

Carriage traverse per turn of hand wheel. 0.200

Swivel table graduated - inches per foot 4

-          degrees included angle 20

Grinding wheel size (standard). 16 x 3 x 5

Grinding wheel (maximum width) 3

Grinding wheel speeds. 1,500 & 1,900 RPM

Rapid infeed stroke 1

Head stock work center #10 Jarno

Foot stock work center. #6 Jarno

Head stock work speeds.. 60, 90, 150, 225, 400, 600 RPM

Diameter of hole through spindle. 1

Head stock spindle nose.. 5A2

Wheel drive motor.. 5 HP

Work drive motor. 1/4 HP

Wheel spindle lubrication motor 1/4 HP

Coolant pump motor 1/10 HP

Hydraulic and lubricating pump motor 1 HP

Machine net weight. 5,300 lbs.

*   May be reduced of work piece configuration. 

EQUIPMENT & FEATURES

Micro-tronic feed

Plunge feed

Hydraulic table traverse

Behind wheel hydraulic

Truing for face & shoulder

Left and right tarry on table reversal

Free standing electrical panel

Coolant in base

Specifications are deemed accurate, however, subject to verification or prior sale.