CINCINATI #2 CUTTER & TOOL GRINDER
S/N 1D2T5K-18
GENERAL SPECIFICATIONS:
CAPACITY:
Swing over table....................... 10 1/2" diameter
Length, between right and left-hand tail stocks..... 27"
Length, between tail stock and work head........ 21 1/2"
Face mills on work head.................... 10" diameter
Saws on table.............................. 48" diameter
Formed cutters.......................... 5 1/2" diameter
TAPER HOLE IN WORKHEAD SPINDLE
One end...................... No. 12B & S or No. 5 Morse
Other end......... No. 50 Series National Standard Table
T-Slots (number and size).............. One. 563".565"
Working surface........................ 5 1/4" x 36"
RANGE
Longitudinal movement of table..................... 24"
Cross movement of table............................ 10"
Cross range gained by wheel head eccentricity.... 3 1/2"
Cross range gained by swivel table............... 3 1/2"
Total extended cross range......................... 17"
Table swivels............................... 180 degrees
SWIVEL TABLE ADJUSTMENTS:(Taper per foot on diameter)
Tange-Bar taper setting device......Toward wheel head 5"
Away from wheel head 5"
Fine taper setting device.......... Toward wheel head 2"
Away from wheel head 2"
Table graduation in center, in degrees....... 90 degrees
Vertical movement of grinding wheel spindle..... 10 1/2"
Swivel movement of grinding wheel spindle... 300 degrees
Maximum distance centerline spindle to top of table.... 13 5/8"
Grinding wheel spindle speeds (two)..6530 RPM & 3890 RPM
Grinding wheel surface speeds...6" Diam. wheel 6110 FPM
3 1/3" Diam. wheel 5985 FPM
EQUIPMENT AND FEATURES:
Slow table traverse
Two 2) tail stocks
Work head
Table feed rate knob
Power traverse
Motorized tilting work head with bracket
No. 1 radius grinding attachment
Horizontal vise
Centering gage
#50 Taper work head
Muskegon Universal grinding fixture #GF-110
(25) Misc. collets
Misc. carbide tipped tools
Bokum AB4-12 (For re-sharpening boring tools)
(1) Table single point dresser
(1) Set of manuals
(2) Dogs for table
Wheel guard
MOTOR & CONTROLS
1 HP Work head motor
110 Volts control
220 Volts/440 3 60 (Currently wired)
Floor space: 56 1/2" x 68 1/2" x 60" Tall max.
Weight approx.: 2,050 lbs.
Machine is from a government shop. The machine has original Cincinnati color and is virtually like new condition with a large assortment of tools.
Specifications are deemed accurate, however, subject to verification or prior sale.
