CINCINNATI MONOSET TOOL & CUTTER GRINDER
S/N 31521C5Y‑17 Year: 1971
STANDARD MACHINE INFORMATION
GENERAL DESCRIPTION
The MONOSET grinder consists of a fixed bed and two basic
units ‑ the wheelhead unit and the workhead unit ‑ strategically
located on the pedestal/base. These units provide 8 axes of
motion (5 linear, 2 swivel, and 1 rotary) that involve 8
separate machine elements as follows:
1. Workhead turntable, swivels through 235 degrees
in the horizontal plane.
2. Workhead offset slide, moves 5.25 inches in a
horizontal plane.
3. Workhead main slide, moves 5.75 inches in a
horizontal plane.
4. Workhead tilt, pivots through 80 degrees in a
vertical plane.
5. Workhead spindle, rotates through 360 degrees
about its axis.
6. Wheelhead cross slide, moves 7.50 inches
in a horizontal plane.
7. Wheelhead longitudinal slide, moves 6.00 inches
in a horizontal plane.
8. Wheelhead vertical slide, moves 9.50 inches in a
vertical plane.
CAPACITY
Workhead swing over main slide max. dia ................ 12"
Workhead collet hole ‑ max. dia ........................ 1.25"
Grinding wheel ‑ max. dia .............................. 4"
Distance between workhead spindle nose and tall
center ‑ max. length ................................... 6"
Lead generated by lead machine mechanism ‑ min ......... 1.81"
RANGE
Workhead, longitudinal slide movement .................. 5.75"
Workhead, offset (cross) slide movement ................ 5.25"
Front of center ........................................ 3"
Rear of center ......................................... 2.25
Workhead, turntable swivel ‑ max (degrees).............. 235
Workhead, vertical tilt (degrees) ...................... 80
Above and below center (degrees) ....................... 40
Workhead, spindle rotation (degrees) ................... 360
Wheelhead, longitudinal slide movement ................. 6"
Wheelhead, transverse (cross) slide movement ........... 7.50"
Wheelhead, vertical movement ........................... 9.50"
Above center ........................................... 4.50"
Below center ........................................... 5"
SPEEDS
Allowable variations of speeds, with spindle running.... +0%
freely and under no load ............................... ‑8%
Workhead spindle ‑ 1 speeds of (RPM) ................... 295
Wheelhead spindle ‑ 3 speeds of (RPM) ........ 4000, 5729, 8000
FLOOR SPACE & SHIPPING DATA
Area of base only ...................................... 25" x 26"
Area required for machine, including swivel
and over travel movements .............................. 60" x 67"
Height, from floor to center of workhead
spindle ................................................ 47.72"
Height, overall with wheelhead raised .................. 62.12"
Net weight (including motor & controls),
approx ................................................. 1525 lbs
EQUIPMENT & FEATURES
Motorized work head
Micrometer hand wheel
Table dogs
Specifications are deemed accurate, however, subject to verification or prior sale.
