10” x 24” LANDIS TYPE C HYDRALIC UNIVERSAL GRINDER

S/N 259-78

STANDARD SPECIFICATIONS 
Maximum distance between work centers 26 3/4”
Maximum weight machine will carry on centers.. 250 lbs.
Maximum work swing – with water guards removed... 10 3/4”
Maximum diameter machine will grind with 12” wheel 10”
Floor space required... 5’ 4” x 8’ 0”

WORK CARRIAGE
Traverse speed – inches per minute... 3” – 144”
Distance between work carriage guides – center to center 8 3/4”
Dimensions of work carriage guides.. 1 1/2” x 55 3/4”
Swivel table graduated to grind taper per foot – included angle. 2”
Swivel table graduated to grind degree – included angle 10”

WHEEL BASE
Grinding wheel size – standard12” x 1” x 5”
Length of grinding wheel spindle. 20 1/2”
Dimensions of wheel spindle bearings. 2” x 5”
Grinding wheel spindle speed.. 1590 RPM
Grinding wheel drive – number V belts 3
Distance between grinding wheel head guides – center to center... 11”
Dimensions of grinding wheel head guides..... 1 3/4” x 21”
Grinding wheel head swivels – each way. 90”
Grinding wheel head lower base swivels – each way... 90”
Weight of grinding wheel head assembled – including motor.. 535 lbs.

HEAD STOCK
Diameter of work center. 3/4"
Work center taper..No. 6 Jarno
Pitch diameter of spindle bearings.. 2 3/8”
Length of head stock bearing on table 13 1/2"
Work speeds 55 to 495 RPM
Head stock swivel graduated to angle of 90”
Head stock swing over water channel for face grinding. 12”
Weight of head stock assembled complete – including motor 250 lbs.

FOOT STOCK
Diameter of spindle.. 1 1/2"
Work center taper. No. 6 Jarno
Diameter of work center... 3/4"
Length of foot stock bearing on table 8”
Weight of foot stock. 50 lbs.

Specifications are deemed accurate, however, subject to verification or prior sale.