0CF-80 CINCINNATI HEALD ROLL TYPE INTERNAL GRINDER

                   S/N 46051    Year: 1975

STANDARD SPECIFICATIONS

 CAPACITIES

Maximum outside diameter of work.............. 1 9/16" or 40mm

Minimum outside diameter of work.............. 5/32" or 4mm

Maximum length of work........................ 1 5/8" or 41mm

Minimum bore of work.......................... 3-32" or 2mm

Maximum swivel of work................... +/- 3 Degrees (optional)

Center of wheel spindle from floor............ 40 3/4" or 1035mm

Floor space (with coolant tank)............... 94" X 83 1/2"

                                               2390 X 2120 mm

Gross weight crated (approx.)................. 8500 lbs.

                                               3825 kgs.

SPEEDS & FEEDS

Table travel (total including runout)......... 5" or 127mm

Table oscillation stroke...................... 0-1" or 0-25mm

Cross slide travel (total).................... 1" or 25mm

Controlled force feed stroke (on dia.)........ .500" or 13mm

Rate feed stroke (on dia.).................... .010" or 0.25mm

Work surface speed............................ 200 - 500 SFPM

High force (adjustable).................. 0 - 150 lbs. or .00125mm

Wheel wear compensation (on dia.)....... .000050" min. or .00125mm

                                         .005" max. or 0.012mm

DRIVE AND POWER REQUIREMENTS

Hydraulic pump motor.......................... 3 HP @ 1800 RPM

Coolant pump motors (2) (optional)............ 3/4 HP + 1/2 HP

Work head motor............................... Hydraulic

Wheel head motor (CRP4B).................. 7-1/2 HP @ 3600 RPM

 EQUIPMENT & FEATURES

Roll type work head

Hydraulic single point auto diamond dresser

Hi frequency spindle

Auto load - Unload capabilities

Exterior oscillator

All electrics & controls

Specifications are deemed accurate, however, subject to verification or prior sale.