Ref: UEDG4706








                                          10 x 36 LANDIS TYPE CH PLAIN CYLINDRICAL GRINDER

                                                                          S/N 510 16   Year: 1954


STANDARD CATALOG SPECIFICATIONS
Nominal work swing..................................... 10"
Nominal distances between work centers................. 36"
Maximum Work Swing & Diameter standard machine will grind with full size standard wheel on basic machine.............. 11 31/32"
Minimum Diameter Wheel to grind zero diameter work
on centers............................................. 9 1/4"

HYDRAULIC TANK
Hydraulic tank capacity (gallons)...................... 25 1/2
Maximum pressure....................................... 300 PSI
Motor..................... 3 HP........................ 1140 RPM

WORK CARRIAGE
Traverse speed (inches per minute)..................... 2 to 240
Traverse per turn of hand wheel........................ .001 grad.

WORK HEAD
Vari speed work drive
Work head................. 2 HP................... 1150   2300 RPM

WHEEL HEAD & WHEEL FEED
Grinding wheel standard size....................... 30" x 3" x 12"
Work head swivel....................................... 10 degrees
Grinding wheel spindle speed........................... 1755 RPM
Grinding wheel motor................................... 15 HP
Automatic infeed at table reversal on diameter with
hydraulic infeed.............................. 0.0002" to 0.0004"
Distance wheel centerline to work centerline:
Maximum................... 17"     Minimum.............. 3"
Work diameter reduction per revolution of fine feed knob:
Basic machine............. 0.005"  Hyd. infeed mach..... 0.001"
Work diameter reduction per revolution of
Hand wheel.............................................. 0.100"

EQUIPMENT & FEATURES
Above wheel guard dresser.
Micro feed.
Lever operated tail stock.
Coolant in base.
Attached electrical.
Dead center head stock.

Specifications are deemed accurate, however, subject to verification or prior sale.